Audix M3 Tri-Element Hanging Ceiling Microphone with 4′ Cable

21x Telah Dilihat

Harga saat ini adalah: Rp 17.857.600. Harga aslinya adalah: Rp 22.322.000.

Stok: Tersedia

SKU: M3W Kategori:

Deskripsi Produk

M3 Series TRI-ELEMENT HANGING CEILING MICROPHONE

The M3 is an innovative, tri-element hanging ceiling microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance.

The M3 ceiling microphone incorporates three-phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating /air conditioning. Low noise preamp circuitry is employed for the highest possible signal to noise and studio-quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum-rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.

FEATURES
100% RF shielding and immunity
Gold diaphragm condenser capsules with studio-quality sound
Low impedance design allows for extremely long cable runs (if required) without cross-talk or interference
Frequency and pattern tailored for voice clarity and rejection of extraneous noise
Evenly dispersed sound with undetectable phase
High-quality silicone jacketed microphone cable with adjustable length and position
Plenum-rated junction box with RJ45 connector
All visible components of the microphone and cable are the same color: charcoal or white
TAA compliant
Very high output, low self-noise
Easy to install

 

Transducer Type Pre-Polarized Condenser
Frequency Response 30 Hz – 19 kHz
Optimized Response 70 Hz – 9 kHz
Polar Pattern Hypercardioid
Output Impedance 150 Ohms balanced
Sensitivity 34 mV / Pa @ 1k
Equivalent Noise Level 22 dB (A weighted)
Off Axis Rejection 1 capsule >23 dB at 180º relative to 0º 2 capsules >18 dB at 120º 3 capsules >9 dB at 60º
Signal to Noise Ratio 72 dB
Maximum SPL ≥128 dB
Dynamic Range 106 dB
Power Requirements 18 – 52 Volts phantom
Connector Terminal block or XLR
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish 95 grams (mic only) / 3.32 ounces
Weight 50mm (2 inches)
Length 30mm (1.2 inches)

 

Berat 2 kg