- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB B output topologies offer the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· “FIT” (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
Channels | 4 |
Sensitivity | 1.4 V |
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | 100 dB |
THD (full rated power, 20 Hz – 20 kHz) | < 0.05% |
Intermodulation Distortion (from 0 dB down to -40 dB) | <0.05% |
Frequency Response (at 1W, 4/8 ohms) | /- 0.5 dB |
Phase Response (at 1 watt, 10 Hz – 20 kHz) | /- 35 degrees |
Crosstalk (below rated power) 20 Hz to 1 kHz | > 80 dB |
Common Mode Rejection (20 Hz to 1 kHz) | > 50 dB |
Maximum Input Level before Compression | 20dBu |
Load Impedance | 70V (4/8/16 Ohm) |
Voltage Gain (at maximum level settings) (8/4 ohm operation) | 20:1 (26 dB) |
Power Draw at Idle (120VAC mains: standby mode) | 58W |
Dimensions | 3.5″ x 19″ x 16.25″ |
Weight | 27 lbs 8 oz |
Shipping Weight | 32 lbs |