Room
In the Room setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.
TonePrint 3
The third TonePrint is a Church reverb with Shimmer and a luscious TriChorus. MASH controls the input level of your instrument, acting just like a volume pedal. This means that the signal is only audible when you MASH the switch!
Hall
In the Hall setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.
Spring
Set on Spring reverb, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.
Plate
Using the Plate setting, MASH controls the level of the reverb effect. If you turn the level knob all the way down, you can use the MASH switch as a volume pedal for the reverb signal. This means that if you don’t MASH the switch the reverb is inaudible.
Church
When you go to Church, MASH controls the reverb decay for a maximum of 20 seconds. Once you lift your foot of the switch, the decay parameter will return to the position of the decay knob. Pro tip: Set the decay knob to minimum for a dramatic effect!
Shimmer
In Shimmer mode, MASH raises the volume of the Shimmer effect, which essentially is sending the Church algorithm through a Sub ‘N’ Up Octaver in a feedback loop. At the same time, MASH controls the reverb decay to a maximum of 13,9 seconds. Finally, it also changes the tone of the Shimmer sound.
Mod
Using the Mod setting, MASH affects the speed and depth of the reverb modulation provided by our sweet sounding TriChorus algorithm known from the Corona Chorus.
LoFi
In the LoFi mode, MASH controls reverb decay up to a maximum of 20 seconds. It also manipulates the tone of the reverb.
TonePrint 1
The first TonePrint preset is a Shimmer reverb based on the TC Ambient algorithm with an added vibrato effect. MASH controls the modulation depth and the feedback of the Vibrato.
TonePrint 2
The second TonePrint takes a Shimmer reverb based on the TC Cathedral algorithm and combines it with a flanger. MASH raises the volume of the Shimmer and the delay of the Flanger.
